Download Print this page

Hellenbrand TNT Series Specifications page 5

Tnt series water conditioners

Advertisement

SideMount
Where ceiling heights may pose a restriction or a side-mounted configuration is preferred, TNT Series systems are available in this
design configuration. Factory pre-piped and pressure tested, these system designs must be shipped either skid mounted or have
face piping dis-assembled for shipment and re-assembled at the job site. Available with non-corrosive polyglass composite tanks or
steel. Consult factory for details.
Skid mounted and
factory pre-piped
Optional skid mounted system
design configurations with or
without factory interconnecting
piping for twin or tri-plex system
designs are available, in both
top-mount or side-mount design
configurations.
2" Meter
2" Brass Meter
■ Standard Range 1,250 Gal. Min. to 21,250 Gal. Max.
■ Extended Range 6,250 Gal. Min. to 106,250 Gal. Max.
3" Meter
■ Standard Range 3,750 Gal. Min. to 63,750 Gal. Max.
■ Extended Range 18,750 Gal. Min. to 318,750 Gal. Max.
■ Other meters available, consult factory
2" Meter and Flow/Pressure Loss Data
■ Flow accuracy –– +5% from 3 to 150 GPM
■ Dimensions & Flow Data are the same with NT Microprocessor
3" Meter and Flow/Pressure Loss Data
■ Flow accuracy –– +5% from 7 to 300 GPM
■ Dimensions & Flow Data are the same with NT Microprocessor

Advertisement

loading

This manual is also suitable for:

Tnt-300-24Tnt-300-30Tnt-450-30Tnt-450-36Tnt-600Tnt-750 ... Show all