Advertisement
TNT Series
. MINERAL TANK: Poly Glass™ Composite tank with Poly-
A
ethylene Inner Shell and Fiberglass Roving Manufactured to
Operate at 150 psi. NSF Approved.
B. DISTRIBUTOR SYSTEM: Three-Inch Hub & Lateral
Distribution for Maximum Service Flow and Minimal Pressure
Loss.
C. MINERAL: High Capacity Ion Exchange Resin. Uniform
and stable beads assure long life, high salt efficiency, and
maximum hardness removal.
D. UNDERBEDDING: Multi-Layered Gravel Underbedding
assures full usage of mineral bed and allows for a smooth
and constant water flow for service and regeneration.
E. BRINE TANK: Rotationally Molded Polyethylene with
Dust-tight cover.
F. GRID PLATE: Grid plate allows for dry salt storage. Avail-
able in various sizes and heights.
G. OPTIONAL SAFETY BRINE VALVE: Acts as a Second-
ary Shut-Off for Timed Brine and may be used as a Primary
Shut-Off without Timed Brine.
Typical Single Tank Installation
TOP VIEW
Twin Alternating Tank Installation
(Available with individual brine tanks as shown or with one twin brine tank.)
Note:
1. Optional stainless steel flex connectors are available for the inlet and outlet connection with each system and must
be installed on systems utilizing Polyglass™ composite tanks with rigid piping in copper, galvanized...etc.
2. Union type connections are recommended on the inlet and outlet connections.
Note: Steel tanks optional
Note:
1. Optional stainless steel flex
connectors are available for
inlet and outlet connections.
These are recommended
on systems utilizing Polyl-
glass composite tanks with
rigid piping such as copper,
galvanized, ect.
2. Union type connections are
recommended on the inlet
and outlet connections.
Advertisement
