Installing The Tempan - Dell Vostro 360 Owner's Manual

Installing The Tempan

1. Place the tempan on the chassis.
2. Thread the cables back in their place and ensure they are secured into the chassis
clips.
3. Tighten the silver and the black screws that secure the tempan to the chassis.
touch control board .
4. Install the
power switch assembly .
5. Install the
converter board .
6. Install the
speakers .
7. Install the
system board .
8. Install the
CPU heatsink .
9. Install the
CPU fan .
10. Install the
system board shield .
11. Install the
optical drive .
12. Install the
hard drive cage and hard drive .
13. Install the
middle frame .
14. Install the
rear I/O cover .
15. Install the
rear stand cover .
16. Install the
rear stand .
17. Install the
rear cover .
18. Install the
19. Follow the procedures in
After Working Inside Your Computer .
67