Pci Configuration - Dell PowerEdge C6220 Hardware Owner's Manual

PCI Configuration

Scroll to this item and press Enter to view the following screen:
NOTE: The PCI-E Gen2 x16 slot 1 and slot 2 are supported up to Gen2 5.0 Gigabits
bandwidth. If user inserts Gen3 .0 devices into the 2 slots that will only train at
Gen 2.0 speed, not Gen 3.0.
Option
Embedded Network Devices
NIC Enumeration
(Onboard default)
Active State Power
Management Configuration
PCI Slot Configuration
PCIe Generation
(Gen3 default)
Description
Configure embedded network devices.
Onboard – Default. Sets PXE boot from on-board NIC
then Add-on NIC adapter.
Add-in – Sets PXE boot from Add-on NIC adapter
then on-board NIC.
To control Active State Power Management (ASPM).
Configures PCI add-in card.
Sets the PCI signaling rate at Gen3 8.0/Gen2 5.0/Gen1
2.5 Gigabits bandwidth.
Installing System Components | 81