Dell PowerEdge C6220 Hardware Owner's Manual page 101

Token Setup option
Serial port
00D7
Number
Load Optimal
00D8
Defaults
Legacy USB
00FE
Support
Legacy USB
00FF
Support
0117 SATA Port0
0118 SATA Port0
0119 SATA Port1
011A SATA Port1
011B SATA Port2
011C SATA Port2
011D SATA Port3
011E SATA Port3
011F SATA Port4
0120 SATA Port4
0121 SATA Port5
0122 SATA Port5
Embedded
0135
SATA Controller
Description
Serial Console redirection ON - output to COM2.
Requests a optimal default of SETUP values on the next
boot.
System does not provide legacy USB support for operating
system.
System provides legacy USB support for operating system.
Sets the 1st Serial ATA drive controller to OFF.
Sets the 1st Serial ATA drive controller to Auto (enabled if
present, POST error if not present).
Sets the 2nd Serial ATA drive controller to OFF.
Sets the 2nd Serial ATA drive controller to Auto (enabled
if present, POST error if not present).
Sets the 3rd Serial ATA drive controller to OFF.
Sets the 3rd Serial ATA drive controller to Auto (enabled if
present, POST error if not present).
Sets the 4th Serial ATA drive controller to OFF.
Sets the 4th Serial ATA drive controller to Auto (enabled if
present, POST error if not present).
Sets the 5th Serial ATA drive controller to OFF.
Sets the 5th Serial ATA drive controller to Auto (enabled if
present, POST error if not present).
Sets the 6th Serial ATA drive controller to OFF.
Sets the 6th Serial ATA drive controller to Auto (enabled if
present, POST error if not present).
Disables the SATA controller. The token applies to the first
on-board SATA controller.
Installing System Components | 101