Dell PowerEdge C6220 Hardware Owner's Manual page 80

Option
Embedded SATA Link Rate
(Auto default)
SATA Port 0
(Auto default)
SATA Port 1
(Auto default)
SATA Port 2
(Auto default)
SATA Port 3
(Auto default)
SATA Port 4
(Auto default)
SATA Port 5
(Auto default)
Power Saving Features
(Enabled default)
HDD Security Erase
(Disabled default)
80 | Installing System Components
Description
Auto – Sets the SATA link rate at maximum.
1.5 Gbps
– Sets the SATA link rate at minimum as 1.5
Gbps. For power consumption.
3.0 Gpbs – Sets the SATA link rate at minimum as 3.0
Gbps.
Off – Sets the 1st Serial ATA drive controller to Off.
Auto – Sets the 1st Serial ATA drive controller to Auto
(enabled if present, POST error if not present).
Off – Sets the 2nd Serial ATA drive controller to
Off.
Auto – Sets the 2nd Serial ATA drive controller to Auto
(enabled if present, POST error if not present).
Off – Sets the 3rd Serial ATA drive controller to Off.
Auto – Sets the 3rd Serial ATA drive controller to Auto
(enabled if present, POST error if not present).
Off – Sets the 4th Serial ATA drive controller to Off.
Auto – Sets the 4th Serial ATA drive controller to Auto
(enabled if present, POST error if not present).
Off – Sets the 5th Serial ATA drive controller to off.
Auto –Sets the 6th Serial ATA drive controller to Auto
(enabled if present, POST error if not present).
Off – Sets the 6th Serial ATA drive controller to off.
Auto –Sets the 6th Serial ATA drive controller to Auto
(enabled if present, POST error if not present).
This feature will allow users to disable/enable the
feature that allows SATA HDDs to initiate link power
management transitions.
Sets/Unlocks the HDD Security Freeze Lock.