Dell OptiPlex 9020 Mini Tower Owner's Manual page 33

Table of Contents

Advertisement

Option
Password Bypass
Password Change
TPM Security
Computrace
Chassis Intrusion
CPU XD Support
OROM Keyboard Access
Description
System Password Min
System Password Max
System Password and the internal HDD password prompts
Allows you to bypass the
during a system restart.
Disabled - Always prompt for the system and internal HDD password when
they are set. This option is disabled by default.
Reboot Bypass - Bypass the password prompts on restarts (warm boots).
NOTE: The system will always prompt for the system and internal HDD
passwords when powered on from the off state (a cold boot). Also, the system
will always prompt for passwords on any module bay HDDs that may be present.
Allows you to determine whether changes to the system and hard disk passwords are
permitted when an administrator password is set.
Allow Non-Admin Password Changes - This option is enabled by default.
This option lets you control whether the Trusted Platform Module (TPM) in the system
is enabled and visible to the operating system.
TPM Security - This option is disabled by default.
TPM ACPI Support
TPM PPI Deprovision Override
Clear
TPM PPI Provision Override
NOTE: Activation, deactivation, and clear options are not affected if you load the
setup program's default values. Changes to this option take effect immediately.
This field lets you activate or disable the BIOS module interface of the optional
Computrace Service from Absolute Software .
Deactivate - This option is disabled by default.
Disable
Activate
Enable - This option is enabled by default.
Disable
On-Silent
Allows you to enable or disable the execute disable mode of the processor.
Enable CPU XD Support - This option is enabled by default.
Allows you to determine if you access the Option Read Only Memory (OROM)
configuration screens via hotkeys during boot. These settings prevent access to the
Intel RAID (CTRL+I) or Intel Management Engine BIOS Extension (CTRL+P/F12).
Enable - User may enter OROM configuration screens via the hotkey.
One-Time Enable - User can enter the OROM configuration screens via the
hotkeys during the next boot. After the boot, the setting will revert to disabled.
Disable - User can not enter the OROM configuration screens via the hotkey.
33

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents