Configuring Tcp/Ip Settings; Configuring Internet Properties - Aztech DSL8800GR User Manual

Configuring TCP/IP Settings

Check if your computer uses the default TCP/IP settings.
To check the TCP/IP properties:
1. Select Start > Run. The Run dialog box would appear.
2. Enter control ncpa.cpl on the input box, and then click the OK button.
This would open the Network Connections window in your computer.
3. Right-click LAN and then select Properties. The Local Area Connection
Properties dialog box would appear.
4. Select Internet Protocol (TCP/IP) and then click Propertie'. The Internet
Protocol (TCP/IP) dialog box would appear.
5. Select Obtain an IP address automatically.
6. Click the 'OK' button to close the Internet Protocol (TCP/IP) dialog box.
7. Click the 'OK' button to close the Local Area Connection Properties
dialog box.

Configuring Internet Properties

To set the Internet Properties:
1. Select Start > Run. This opens the Run dialog box.
2. Enter control inetcpl.cpl and then click OK to open the Internet
Properties window.
3. Click on the Connections tab.
4. On the Dial-up and Virtual Private Network settings pane, select Never
dial a connection.
5. Click OK to close Internet Properties.
User Manual
Page 11 of 52