Step 2: Broadband Connection Settings For Fibre - Aztech Singtel FG7009GR Quick Installation Manual

STEP 2:
BroadBand Connection Settings
for Fibre
2.1
Connect
"BROADBAND" Port to the ONT's
"LAN 1" Port highlighted in Yellow
using the Ethernet Cable (RJ45)
Note: Switch off the ONT's power before
you proceed to do the set up.
2.2
For mio TV Set-Top-Box, personal
computer or laptop, please connect
it to the "LOCAL ETHERNET" Port
highlighted in yellow.
2.3
Once the Power Adapter is connected,
follow the power up sequence below.
Power up the Optical Network Terminal
1.
(ONT). Wait for "POWER" and "PON" LEDs
to turn to stable green light.
Power on the Wireless Router. Wait for the
2.
"POWER", "ETHERNET", "BROADBAND",
"INTERNET" and "IPTV" (if applicable) to
turn to stable green light.
Power up your mio TV Set Top Box and
3.
your computer.
Note: For Fibre service, there is no need
to key in user ID and password. All service
credentials will be auto pushed down to
your Wireless Router.
the Wireless Router's
.