Impex MARCY DIAMOND ELITE SM-1050 Owner's Manual page 9

STEP 3 (See Diagram 3)
A.) Do not tighten Nuts and Bolts until instructed to do so.
B.) Attach one end of the Chin-up Bar (#10) to the Left Upright Beam (#1). Secure it with one
M10 x 2 1/8" Carriage Bolt (#28), one Ø ¾" Washer (#38), and one M10 Aircraft Nut (#37)
from side. Secure it with one M10 x 2" Carriage Bolt (#29), one Ø ¾" Washer (#38), and
one M10 Aircraft Nut (#37) from top. Repeat the same step to secure the other end of
Chin-up Bar to the Right Upright Beam (#2).
C.) Attach the Left Safety Catch (#15) to the Left Upright Beam. Attach the Right Safety Catch
(#16) to the Right Upright Beam
D.) Securely tighten all Nuts and Bolts installed in Step-1, Step-2, and Step-3.
8
DIAGRAM 3