Bench Assembly Instructions - Impex MARCY DIAMOND ELITE SM-1050 Owner's Manual

BENCH ASSEMBLY INSTRUCTION
STEP 1 (See Diagram 1)
A.) Do not tighten the Nuts and Bolts until instructed to do so.
B.) Attach the Front Post (#2) to the Front Base (#3). Secure it with two M10 x 2 1/8"
Carriage Bolts (#36), two Ø ¾" Washers (#45), and two M10 Aircraft Nuts (#44).
C.) Attach the Main Seat Support (#1) to the Front Post. Secure it with one M10 x 2 1/8"
Carriage Bolt (#36), one Ø ¾" Washer (#45), and one M10 Aircraft Nut (#44) from top.
Secure it with one M10 x 3 1/8" Carriage Bolt (#37), one Ø ¾" Washer (#45), and one
M10 Aircraft Nut (#44) from side.
D.) Attach the Main Frame to the Rear Stabilizer (#4). Secure it with two M10 x 3 1/8"
Carriage Bolts (#37), one 5 1/8" x 15/8" Bracket (#12), two Ø ¾" Washers (#45), and
two M10 Aircraft Nuts (#44).
E.) Securely tighten all Nuts and Bolts.
14
DIAGRAM 1