Page 1
NOTE: Please read all instructions carefully before using this product ® MARCY Multi Purpose Bench Table of Contents SB-510 Safety Notice Hardware Pack Assembly Instruction Exploded Diagram Parts List Warranty Ordering Parts Model SB-510 Retain This Manual for Reference ®...
WARRANTY..................... ORDERING PARTS..................BEFORE YOU BEGIN Thank you for selecting the MARCY MULTI PURPOSE BENCH SB-510 by IMEX INC. For your safety and benefit, read this manual carefully before using the machine. As a manufacturer, we are committed to provide you complete customer satisfaction.
IMPORTANT SAFETY NOTICE PRECAUTIONS This exercise machine is built for optimum safety. However, certain precautions apply whenever you operate a piece of exercise equipment. Be sure to read the entire manual before you assemble or operate your machine. In particular, note the following safety precautions: 1.
WARNING LABEL PLACEMENT The Warning Label shown here has been placed on the Rear Stabilizer. If the label is missing or illegible, please call customer service at 1-800-999-8899 for replacement. Apply the label in location shown...
ASSEMBLY INSTRUCTION Tools Required For Assembling the Machine: Two Adjustable Wrenches and Allen Wrenches. NOTE: It is strongly recommended for two or more people to assemble this machine to avoid possible injury. STEP 1 (See Diagram 1) A.) Do not tighten Nuts and Bolts until instructed to do so. B.) Attach the Front Post (#3) to the Front Stabilizer (#1).
Page 8
STEP 2 (See Diagram 2) A.) Do not tighten the Nuts and Bolts until instructed to do so. B.) Attach the Incline Support (#8) to the side-holes on the two Backrest Supports (#7). Align the holes. Secure it with one M10 x 6 1/8” Allen Bolt (#25), two Ø ¾” Washers (#32), and one M10 Aircraft Nut (#35).
Page 9
STEP 3 (See Diagram 3) A.) Insert the Adjustment Frame (#9) through the frame holder on Front Post (#3). Attach the two side holes on the Adjustment Frame to the open bracket on front of the Seat Bracket (#6). Secure it with one M10 x 2 3/8” Allen Bolt (#28), two Ø ¾” Washers (#32), and one M10 Aircraft Nut (#35).
PARTS LIST KEY NO. DESCRIPTION QUANTITY Front Stabilizer Rear Stabilizer Front Post Main Seat Support Sliding Block Seat Bracket Backrest Support Incline Support Adjustment Frame Foam Tube 4 ¾” x 2” Bracket Backrest Board Seat Pad Foam Roll T-shaped Lock Pin M18 Lock Knob Stabilizer End Cap 1”...
® IMPEX INC. LIMITED WARRANTY ® IMPEX Inc. ("IMPEX ") warrants this product to be free from defects in workmanship and material, under normal use and service conditions, for a period of two years on the Frame from the date of purchase. This warranty extends only to the original purchaser.