Table of Contents
Advertisement
Settings
The following table summarises the product settings:
Option
Values
Tuner region:
Europe/elsewhere, Japan, USA
The fan is:
used as necessary, never used
Distance measurement:
feet/inches, metres
Do your subs play to 20Hz?
No, THX Ultra2/yes
Boundary Gain Compensation:
off, on
Rear speaker separation
<12"/0.3m, 12-48"/0.3-1.2m,
>48"/1.2m
Use AAC decoder to decode:
all Zone 2 streams, AAC to main out
Zone 2 digital output is:
decoded, bitstream
Copy/Zone 2 analogue out:
fixed, variable
Zone 3 analogue out:
fixed, variable
Timeout to Home buttons:
on, off
Diagnostic displays:
on, off
Is the G68 IR Controller?
Auto, Controller, Not Controller
Main System Address
1-8
Copy System Address
1-8
Zone System Address
1-8
Product Address
1-8
Description
Band selection (MW/LW or AM), tuning steps, and FM
deemphasis standard. For all countries except the USA or
Japan use the Europe setting.
Specifies how the temperature controlled fan operates.
Units for displaying and entering distances.
Subwoofer frequency response.
Reduces the bass to compensate for listening positions close
to a wall.
Separation between rear speakers; only available when there
are four surrounds.
Action of AAC decoder; only if a tape card is fitted.
Zone 2 digital output format when previous option is set to
Zone 2.
Whether the Copy/Zone 2 analogue output is controlled by the
volume control.
Whether the Zone 3 analogue output is controlled by the
volume control.
Whether the soft keys revert to the home keys after a delay.
Whether diagnostic displays are shown.
Whether the product is the infra-red controller for the system.
Advanced setting (normally 1).
Advanced setting (normally 2).
Advanced setting (normally 3).
Advanced setting (normally 1).
C o n f i g u r i n g t h e
d i g i t a l s u r r o u n d
c o n t r o l l e r
Hide quick links:
Advertisement
Table of Contents
