Meridian G68 Installation Manual page 19

To connect the G68AXD, G68XXD, OR G68ADV to Meridian DSP loudspeakers
G68AXD/XXD/ADV
COMMS DIGITAL OUT
511 S-patch box
S5 LEAD
(digital unused)
• Use the Comms part of an M5 lead to connect one of the
COMMS sockets on the G68 to the digital speaker you have
chosen as the master (typically the centre speaker).
• Use the audio part of the M5 lead to connect the digital speaker
to the appropriate digital output socket.
If the system includes more than two Meridian DSP loudspeakers
you may use a 511 S-patch box (available separately) to link
together the S5 leads from each speaker.
• Connect the COMMS output from the master digital speaker to
one socket on the 511 using an S5 lead.
DSP5200 – Main Left (Slave)
COMMS
INPUT OUTPUT
DIGITAL
OUTPUT
S5 LEAD
DSP5200 – Centre (Master)
COMMS
INPUT OUTPUT
DIGITAL
OUTPUT
M5 LEAD
DSP5200 – Surr Left (Slave)
COMMS
INPUT OUTPUT
DIGITAL
OUTPUT
S5 LEAD
• Link each pair of speakers together with an S5 lead, out of
the first speaker and into the second speaker, as shown in the
diagram.
• Connect the inputs to the first speaker of each additional pair to
the 511 (Comms) and the appropriate output of the G68 (audio),
using an S5 lead.
The speakers should then be configured appropriately as master
and slaves, and Left, Right, Centre, Surround; see Meridian DSP
Loudspeaker User Guide for more details.
DSP5200 – Main Right (Slave)
DIGITAL COMMS
INPUTS INPUT OUTPUT
2
1
S5 LEAD
SW1600 – Sub (Slave)
DIGITAL
INPUTS
2
COMMS
INPUT OUTPUT
1
S5 LEAD
DSP5200 – Surr Right (Slave)
DIGITAL COMMS
INPUTS INPUT OUTPUT
2
1
S5 LEAD
 
I n s t a l l i n g t h e
d i g i t a l s u r r o u n d
c o n t r o l l e r
DIGITAL
INPUTS
DIGITAL
2
OUTPUT
1
DIGITAL
IN OUT
DIGITAL
INPUTS
DIGITAL
2
OUTPUT
1