"Bin Full" Detection System - Follett HCC1400A Operation And Service Manual

"Bin full" detection system

The Follett Horizon ice machine incorporates a unique "bin full" detection system that consists of the shuttle and
actuator. The shuttle incorporates a fl ag and sensor. Referencing the fi gure below, the normal running position
of the fl ag is down, out of the sensor. When the bin fi lls to the top and ice can no longer move through the tube,
the machine will force the shuttle fl ag up into the sensor, shutting the machine off. The shuttle actuator, located
above the ice bin allows the ice to curl up within it when the bin is full. In this way, there are no loads generated
that would tend to lift off the lid of the bin.
Shuttle fl ag and sensor
Running
Off
Shuttle actuator
Running
Off
25