White Or Dark Lines In Printout; Blurry Or Smeared Printout; Selecting Printing Preferences - Mac Os X 10.5/10.6/10.7 - Epson Stylus NX330 User Manual

White or Dark Lines in Printout

If you notice white or dark lines in your prints (also called banding), try these solutions before you reprint:
• Clean the print head.
• Make sure the paper type setting matches the type of paper you loaded.
• Make sure you loaded the printable side of the paper faceup.
• Turn off any high speed settings in your product software.
• Align the print head.
• You may need to replace the ink cartridges.
Parent topic:
Related concepts
Print Head Cleaning
Print Head Alignment
Related references
Paper or Media Type Settings
Related tasks
Selecting Advanced Print Settings - Windows

Selecting Printing Preferences - Mac OS X 10.5/10.6/10.7

Selecting Printing Preferences - Mac OS X 10.4
Related topics
Replacing Ink Cartridges

Blurry or Smeared Printout

If your printouts are blurry or smeared, try these solutions:
• Make sure your paper is not damp, curled, old, or loaded facedown in the sheet feeder (the printable
side should be faceup).
• Use a support sheet with special paper, or load special paper one sheet at a time.
• Make sure your paper meets the specifications for your product.
• Use Epson papers to ensure proper saturation and absorption of genuine Epson inks.
• Make sure the paper type setting in your product software matches the type of paper you loaded.
• Remove each sheet from the output tray as it is printed.
Solving Print Quality Problems
191