Stopping The Engine - Husqvarna P-ZT26 CE Operator's Manual

Stopping the Engine

For all models, move the throttle to the minimum
position (tortoise symbol). If the engine has been
worked hard, allow it to idle a minute to attain a
normal operating temperature before stopping. To
prevent fouling the spark plugs, avoid idling the
engine for longer periods.
1. Disengage the mower deck by depressing the
blade switch.
2. Raise the mower deck by pressing the foot pedal
forward to the transport position.
3. When the machine is standing still, activate the
parking brake by pulling the lever upward.
4. Turn the ignition key to the stop position.
5. Move the steering controls outward.
6. Remove ignition key. To prevent unauthorized use,
always remove the key when leaving the mower.
IMPORTANT INFORMATION
Leaving the ignition switch in any other
position than OFF will cause the battery to be
discharged.
OPERATION
Disengage the mower deck and move throttle to minimum
Raise deck to transport position
Place controls in neutral position to stop
8065-085
8065-090
8065-194
33