Parking Brake; Blade Switch; Ignition Switch - Husqvarna P-ZT26 CE Operator's Manual

Parking Brake

The parking brake is found on the left of the machine.
Pull the lever backward to activate the brake and
forward to release it.
IMPORTANT INFORMATION
The machine must stand absolutely still when
applying the parking brake. Always set the
parking brake before dismounting. Release the
parking brake before moving the mower.

Blade Switch

To engage the mower deck, pull the blade switch
knob out. The mower blades are disengaged when
the knob is pressed down fully.

Ignition Switch

The ignition switch is placed on the control panel and
is used to start and stop the engine.
Push in and turn the key clockwise to start the engine.
21
CONTROLS
Parking brake
Blade switch
Ignition switch
8065-006
8065-084
8050-780