Stanley 2-Way Feed Chipper/ Shredder Owner's Manual page 10

Maintenance & Storage
To Remove,Sharpen or Add Chipper
Blades:
Yourchipperwassent with onebladeattachedanda sparebladein the hard-
warebag. Thebelt life will be extendedby operatingthe chipperwith a sharp
bladeat a time.
• Disconnect t he sparkplug wire andgroundagainstthe engine.
• Remove the bladeaccesshatch androtatethe bladeto align with the
accesshatch.
• Remove the flail screeninthe discharge chuteby removingthe pins that
secureit at the top andbottomof the screen.
• Remove the blade usinga 3/16" allen wrenchon the outsideof the
bladeandan adjustablewrenchon the impellerassembly (throughthe
discharge chute). A piece of pipe or wood shouldbe usedto blockthe
flails, preventingthem from inadvertentlyturning.
• Add,replaceor sharpenthe bladesas desired.
• Whensharpeningthe blade,protecthandsby usingglovesandfollow
the original angleof grind.Also, makesureto removean equalamount
from eachbladeandtorqueto 250- 300in. Ibs.
NOTE:Makecerta/?_ bladesam reassembledw/_hthe sharpedgeiac/;_g
upward
Rev. 9/2010 STANLEY is a registered trademark of The Stanley Works or its affiliates and are used under license by GXi Outdoor Power LLC.
10of 12