Advanced Chipset Settings; Dram Frequency; Configure Dram Timing By Spd - American Megatrends MB950 User Manual

Advanced Chipset Settings

This setting configures the north bridge, south bridge and the ME
subsystem. WARNING! Setting the wrong values may cause the system
to malfunction. -
Main Advanced
Advanced Chipset Settings
WARNING: Setting wrong values in below sections
may cause system to malfunction.
► North Bridge Configuration
► South Bridge Configuration
► ME Subsystem Configuration
Main Advanced
North Bridge Chipset Configuration
Memory Remap Feature

DRAM Frequency

Configure DRAM Timing by SPD

Memory Hole
Initiate Graphic Adapter
IGD Graphics Mode Select
NB PCIE Configuration
PEG Port
PEG Force GEN1
Video Function Configuration
►
Memory Remap Feature
This allows remapping of overlaped PCI memory above the total physical
memory.
DRAM Frequency
The options are Auto, 1067 MHz and 1333 MHz.
Configure DRAM Timing by SPD
The options are Auto and Manual.
BIOS SETUP UTILITY
PCIPnP Boot
BIOS SETUP UTILITY
PCIPnP Boot
[Enabled]
[Auto]
[Auto]
[Disabled]
[PEG/PCI]
[Enabled, 32MB]
[Auto]
[Disabled]
MB950 User's Manual
BIOS SETUP
Chipset
Security
Configure North Bridge
features.
<- Select Screen
↑↓ Select Item
+- Change Field
Tab Select Field
F1 General Help
F10 Save and Exit
ESC Exit
Chipset
Security
Disabled
15MB-16MB
<- Select Screen
↑↓ Select Item
+- Change Field
Tab Select Field
F1 General Help
F10 Save and Exit
ESC Exit
Exit
Exit
39