Displaying/Hiding On-Screen Information; Choosing Your Language; Setting The Dvd-Vcr Output Channel; Selecting The Rf Out Sound Mode (B/G-D/K) - Samsung SV-DVD1E Instruction Manual

Displaying/Hiding On-Screen Information

Your DVD-VCR displays most information both on the DVD-VCR
and the television.
You can choose to display or hide this information on the television
screen (except for the Index, Programming MENU and
Timer functions, which cannot be hidden).
GB
USER SET
E N T E R E N D :S E T U P
O S D : O N
TAPE SELECT : E 1 8 0
COLOUR SYSTEM : A U T O
I P C : O N
N I C A M : O N
E N D :S E T U P

Choosing Your Language

You can change the language in which information is displayed on
the screen.
LANGUAGE SET
E N T E R E N D :S E T U P
E N G L I S H E S P A Ñ O L
D E U T S C H D U T C H
F R A N Ç A I S
I T A L I A N O
M E M O R Y: E N T E R
E N D: S E T U P
18
1 Press SETUP on the remote control.
Result: The programming menu is displayed.
2
Press the corresponding , or , buttons to select the
option.
USER SET
3 Press the ENTER button to select this option.
Result: The USER SET menu is displayed.
4
Press the corresponding or buttons, until the cursor is placed
in front of the option.
O S D
5 To... Press or , until...
Display on-screen information O N is displayed.
Hide on-screen information O F F is displayed.
6
On completion, press SETUP twice to exit the menu.
1 Press SETUP on the remote control.
Result: The programming menu is displayed.
2
Press the corresponding , or , buttons to select the
LANGUAGE SET option.
3 Press the ENTER button to select this option.
Result: The LANGUAGE SET menu is displayed.
4
Select the required language by pressing the or
5
Press ENTER to store the language selected.
6
Press SETUP to exit the menu.
Result: From now on, all the on-screen information will be
displayed in the language selected.

Setting the DVD-VCR Output Channel

Your DVD-VCR output channel may need to be changed if the
pictures suffer from interference or if your TV cannot find the
pictures.
Also, you can change the DVD-VCR output channel to adjust the
frequency in which information is displayed on the screen.
1
Press SETUP on the remote control.
Result: The programming menu is displayed.
2
Press the corresponding
I N S T A L L A T I O N option.
3
Press the ENTER button to select this option.
Result: The I N S T A L L A T I O N
4
Press the or buttons, until the cursor is placed in front of the
VCR OUTPUT CH option.
5 Select the required output channel (CH21~CH69) by pressing the
or buttons.
6
On completion, press SETUP twice to exit the menu.
Then tune your television again (see page 13).
Selecting the RF OUT Sound Mode
You can choose the sound mode (B/G or D/K) according to the TV
set connected to your VCR.
1
Press SETUP on the remote control.
Result: The programming menu is displayed.
2
Press the corresponding
I N S T A L L A T I O N option.
3
Press the ENTER button to select this option.
Result: The I N S T A L L A T I O N
4
Press the corresponding
in front of the TV SYSTEM
buttons.
5 Press the button to select G or K.
6
On completion, press SETUP twice to exit the menu.
I N S T A L L A T I O N
, or , buttons to select the
menu is displayed.
AUTO SET UP
MANUAL SET UP
TV SYSTEM
VCR OUTPUT CH
AV2 SET
, or , buttons to select the
I N S T A L L A T I O N
menu is displayed.
or buttons, until the cursor is placed
option.
AUTO SET UP
MANUAL SET UP
TV SYSTEM
VCR OUTPUT CH
AV2 SET
GB
E N T E R E N D :S E T U P
: G
: C H 3 6
: D E C
E N D :S E T U P
E N T E R E N D :S E T U P
: G
: C H 3 6
: D E C
E N D :S E T U P
19