Using Key Lock - Radio Shack 5W 8 Channel 2-Way Business Band Radio Owner's Manual

5w 8 channel 2-way business band radio
Table of Contents

Advertisement

USING KEY LOCK

¿
À
You can lock
/ ,
/
SKIP, QUIET/Q-
, and
on your trans-
SCAN
APO/HI/LO
ceiver to avoid accidentally pressing
them. Hold down
MON/FUNC
press
to lock or unlock
LOCK/PTT
these keys.
When these keys are locked,
pears. If the key tone is on, an error
tone sounds when you press any of
these keys.
SETTING THE
COURTESY TONE
Hold down
while turning on
LOCK/PTT
the radio to turn the courtesy tone on
or off. A tone sounds. While the courte-
&0721(
&0721(
&0721(
&0721(
sy tone is on,
appears and the
party you are communicating with
hears the courtesy tone when you fin-
ish a transmission.
RESETTING THE
TRANSCEIVER
If the transceiver stops operating prop-
erly, hold down
QUIET/Q-SCAN
turning on the transceiver to reset the
transceiver. All the set channels are
cleared, the current channel is Chan-
nel 2, quiet codes are off, and key tone
and courtesy tone are on.
CARE
Keep the radio dry; if it gets wet, wipe it
dry immediately. Use and store the ra-
dio only in normal temperature envi-
, then
ronments. Handle the radio carefully;
do not drop it. Keep the radio away
from dust and dirt, and wipe it with a
damp cloth occasionally to keep it
/2&.
/2&.
/2&.
/2&.
ap-
looking new.
Modifying or tampering with the radio's
internal components can cause a mal-
function and might invalidate its war-
ranty and void your FCC authorization
to operate it. If your radio is not per-
forming as it should, take it to your lo-
cal RadioShack store for assistance. If
the trouble is affecting the telephone
lines, the phone company can ask you
to disconnect your radio until you have
resolved the problem.
while
11

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

19-1208

Table of Contents