Selecting A Channel; Setting Key Tone - Radio Shack 5W 8 Channel 2-Way Business Band Radio Owner's Manual

SELECTING A CHANNEL

Note: You can only select, or scan,
channels when you set two or more
channels.
To manually select a channel , press
¿ À
/ or / . The selected channel
SKIP
number appears.
To scan through the channels , hold
¿ À
down / or / for about 2 sec-
SKIP
6&$1 6&$1
6&$1 6&$1
onds. appears. The transceiver
automatically scans through the chan-
nels and pauses on each active chan-
nel for about 5 seconds. Press
À
/ to change the scan direction.
SKIP
Press any key other than
to stop scanning.
SKIP
To skip a channel to be scanned ,
¿ À
press / or / to select the de-
SKIP
sired channel. Hold down
À
and press / . (skip icon) ap-
SKIP
pears.
To resume scanning the skipped chan-
nel , select the skipped channel, hold
down , and press
MON/FUNC
disappears.
USING QUIET CODE
SCAN
1. Press
QUIET/Q-SCAN
48,(7 48,(7 48,(7 48,(7
quiet code.
code appear.
2. Hold down
MON/FUNC
6&$1 6&$1
6&$1 6&$1
.
QUIET/Q-SCAN
When matching with an appropri-
ate quiet code, the transceiver
stops scanning and
The transceiver goes on scanning
after the signal disappears.
3. Press any key other than
SCAN
ceiver stays on the quiet code just
scanned.
Note: If you press
stop scanning, the transceiver stays on
the pre-set quiet code.

SETTING KEY TONE

¿
/ or
Hold down
to turn the key tone beep on or off.
¿ À
/ or /
(tone icon) appears when the key tone
is on.
Note: The key tone does not beep
when you press
MON/FUNC
FUNC
USING APO/HI/LO
Press
power to high for long distance trans-
À
/ .
SKIP
mission or low for short distance trans-
mission.
Hold down
HI/LO
on or off.
to turn on When Auto Power Off is on, the trans-
and the quiet ceiver automatically turns off when it is
idle for 2 hours.
, then press Press any key to turn the transceiver
appears. back on.
10
48,(7 48,(7
48,(7 48,(7
QUIET/Q-
to stop scanning. The trans-
QUIET/Q-SCAN
and press
MON/FUNC
LOCK/PTT or MON/
, even if the key tone is on
to set the transmitting
APO/HI/LO
+, +, +, +, /2 /2 /2 /2
or appears.
and press
MON/FUNC
to turn Auto Power Off function
$3# 21 21 21 21 $3# $3# 2) 2) 2) 2) $3#
$3# $3# $3# $3#
or appears.
flashes.
to
¿
/
.
APO/