Washing Clothes Manually; Using Delay Start; Using Silver Wash Options - Samsung WD7752C8A User Manual

washing a load of laundry

WASHING CLOTHES MANUALLY

You can wash clothes manually without using the Fuzzy Logic feature.
To do so:
1. Turn the water supply on.
2. Press the
3. Open the door.
4. Load the articles one at a time loosely into the drum, without overfilling.
5. Close the door.
6. Put the detergent and, if necessary, softener or prewash detergent, in the appropriate
compartments.
7. Use the Cycle Selector to select the appropriate cycle.
8. Press the Temperature button to select the temperature. (cold(0˚C), 30˚C, 40˚C, 60˚C, 95˚C)
9. Press to Rinse button to select the required number of rinse cycles.
Maximum number of rinse cycles is five.
The washing duration will be prolonged accordingly.
10. Press the Spin button to select the spin speed. [ 0, 400, 800 or 1200 revolutions per minute(rpm)]
0 : No spin , Non display : Rinse hold
11. Press the button repeatedly to cycle through the available delayed start options (from 3 hour
to 19 hours in one hour increment). Displayed hours means the time of finished washing-
cycle.
12. Press the Start/Pause button and the machine will begin the cycle.

USING DELAY START

You can set the washing machine to finish your wash automatically at a later time, choosing from 3 to 19
hour delay (in 1 hour increment). Displayed hours means the time of finished washing-cycle.
To do this:
1. Manually or automatically set your washing machine for the type of clothes you are washing.
2. Press the Delay Start button repeatedly until the delay time is set.
3. Press the Start/Pause button. The Delay Start indicator will light, and the clock will begin
counting down until it reaches your finish time.
4. To cancel "Delay Start", press the
again.

USING SILVER WASH OPTIONS

When this function is selected, silverions are generated in the water through ionization. These silverions can
stop the growth, division and propagation of bacteria, so as to sanitize your clothes.
The Silver generator carries a warranty of 10 years for once run a week and if you use more
often, please call for a Service Technician to replace it for a new one in time.
1. Turn the water supply on and press the
2. Open the door, load the articles one at a time loosely into the drum, and then close the door.
3. Add the detergent and softener(if necessary) into the appropriate compartment.
4. Turn the dial to select the appropriate program.
• Silver Nano Function is available with program of Standard, Intensive, Super Quick, Child,
Easy Care, Delicate, and Drum Clean.
5. Press the Silver Wash button and select function of Sterilization or Protection.
• You can only select Sterilization if you've chosen Single Wash.
• You can only select Protection if you've selected rinse times.
6. Select the laundry load level, wash temperature, rinsing times and spin speed as you wish.
7. Press the Start/Pause button and the wash cycle will begin.
14_ Washing a load of laundry
(Power) button on the washing machine.
(Power) button, then turn the washing machine on
(Power) button.