Childlock (Button Lock Function; Washing Clothes Manually - Samsung WD6102CKC Owner's Instructions Manual

Washing a Load of Laundry

Childlock (button lock function)

Is a function for children not to handle the washing machine.
SETTING/RELEASE
If you want to set up or release that function, press both Temperature and Rinse buttons at the same
time in 3sec.
How to Set up:
1. It can be set up during the power-on or operation of the washing machine.
2. If you set up the CHILDLOCK function during the laundry operation, no button except for Power
button can be controlled until you release that function.
3. The CHILDLOCK lamp will be lighted.
Notice :
1. In case the power is on again, the CHILDLOCK function remains unchanged.
2. In case of releasing that function, follow the way of release mentioned above.
3. When the other buttons, except for the Power button, are not controlled after you turn on the
Power , check "CHILDLOCK LAMP", please.

Washing clothes manually

You can wash clothes manually without using the Fuzzy Logic feature.
To do so:
1. Turn the water supply on.
2. Press the Power button on the washing machine.
3. Open the door.
4. Load the articles one at a time loosely into the drum, without overfilling.
5. Close the door.
6. Put the detergent and, if necessary, softener or prewash detergent, in the appropriate
compartments.
7. Press the Temperature button to select the temperature.
[cold water, 40˚C, 60˚C, 75˚C, 95˚C]
8. Press to rinse button to select the required number of rinse cycles.
Maximum number of rinse cycles is five.
The washing duration will be prolonged accordingly.
9. Press the Spin button to select the spin speed.
10. Press the Delay Start button repeatedly to cycle through the available delayed start options (up to
24 hours maximum in one hour increments.). Displayed hours means the time of finished washing-
cycle.
11. Press the Start/Pause button and the machine will begin the cycle.
B-4 SAMSUNG Washing Machine Owner's Instructions