Overview Of The Control Panel - Samsung WD6102CKC Owner's Instructions Manual

Washing a Load of Laundry

Overview of the control panel

1. Digital graphic display
Displays the remaining wash cycle time, all of washing information and error messages.
2. Air Wash button
Use to remove bad smells.
Selected in the sequence: Suit/Jumper  Knit  Coat  Bedding  Cancel
3. Wash selection button (
Use this to only perform washing or prewash.
Selected in the sequence: Main Wash  Prewash + Main Wash  Main Wash.
The washing time cannot be adjusted (for the Cotton course).
Prewash can only be selected for Cotton, Intensive, Boil, Eco-Boil, Blanket and Towel.
4. Temperature selection button
Selected in the sequence: 40˚C  60˚C  Cold  40˚C.
The water temperature varies depending on the course.
Do not allow only hot water to be supplied.

5. Rinse selection button (
Select this to add a rinse cycle or only perform the rinse cycle.
You can select this up to 5 times.
6. Spin selection button (
You can select the spin speed, if necessary.
If only the spin cycle is selected and Start/Pause is pressed in the middle of the spin cycle, the
machine starts spinning from the beginning.
The spin speed can vary, depending on the course.

No Spin means no spinning is performed after the drain.

7. Dry selection button
Selected in the sequence: Cupboard  Extra  Iron  Light  Time (30min  1:00min  1:30min
 2:00min  2:30min)  Cupboard.
8. Silver Wash button (
Silver water is supplied in the wash cycle as well as the last rinse, featuring sterilization and
antibacterial coating.
B-2 SAMSUNG Washing Machine Owner's Instructions
)
)
)
)