Entone Amulet User Manual page 8

High definition television receiver

Hide thumbs Also See for Amulet:

Chapter

Before installing Amulet, be sure to unplug Amulet, your TV and any other audio-video equipment you are

using. This precaution will help to prevent danger of electrical shock and damage to Amulet and your

equipment.

Be careful when moving your television to avoid accidental tipping or movements that might cause injury to

you or those around you.

To ensure proper use of this product, please read this user manual carefully and retain for future reference.

Should the unit require maintenance, contact your service provider.

To prevent fire or shock hazard, do not expose this product to rain or moisture.

To reduce the risk of electric shock, DO NOT remove cover or back. No user serviceable parts inside.

Refer servicing to qualified personnel.

To help prevent electric shock, plug the power cable into properly grounded sources. Use only properly

grounded extension cords and adaptors, if they are needed.

Make sure nothing is lying on any of the cables.

Be sure the cables are located where they will not be stepped on or tripped over.

Do not spill food or liquids onto the unit.

Do not push any objects into the free slots. Doing so will damage the unit, can cause fire or electrical

shock, and can short out interior components.

Keep the equipment away from heat sources and radiators.

Do not block cooling vents.

Do not place the equipment in a closed-in wall unit.

When you disconnect a cable, pull on its connector or on its strain relief loop, not on the cable itself.

Some cables have a connector with locking tabs; if you are disconnecting this type of cable, press in on

the locking tabs before disconnecting the cables.

When you connect a cable, make sure both connectors are correctly oriented and aligned before

connecting to avoid bending connector pins.