Entone Amulet User Manual page 40

Amulet High Definition Television Receiver User's Guide
Multi-channel
sound not
working
No sound, poor
sound or
popping noise
on HDMI
the minimum level?
• If HDMI or component is used. Try disabling
AC-3.
• If HDMI is used, check the resolution and try
to use the composite audio output.
• Check with service provider that programs
contain multi-channel AC-3 signal.
• Check that AC-3 is enabled in the Amulet.
• Check your TV or A/V equipment for AC-3
multi-channel setup.
• HDMI is an evolving technology, so it is
possible that some TVs may not operate
properly with Amulet. In case of problem, use
component video output and composite audio
output to connect your primary TV.
Section 5 – Connecting
to Audio System
Section 4 – Connecting
the TV
Copyright © © © © 2007 Entone, Inc. All rights reserved
.