Entone Amulet User Manual page 13

High definition television receiver

Hide thumbs Also See for Amulet:

Chapter

Amulet offers several options for connecting audio and video to popular TV and audio equipment.

You can connect Amulet to the TV using composite, component, S-Video or HDMI connection. You may

also connect the Amulet to the TV using coaxial cable connection.

If your TV supports 480p, 720p or 1080i pictures, use the HDMI or the component output jacks to connect

to your TV. HDMI stands for High Definition Multimedia Interface. HDMI transfers digital audio and

uncompressed digital video on a single cable. As a result, audio cables and video cables do not need to be

connected separately. The HDMI output jack is designed to HDMI version 1.1 specifications.

HDMI and component video output support high definition video signal. They will provide the best quality

video signal for HD ready TV sets.

S-Video output will provide the best quality video signal for late-model TV sets. The RCA A/V composite, S-

Video and RF TV output jacks only support 480i pictures.

The following table shows the video and audio output jacks and their supported video formats:

HDMI

Component

S-Video, RCA

Composite

RF TV

No separate audio output

required

RCA Audio

No separate audio output

required

1080i60, 720p60, 480p60, 480i60

(Selectable and default to 720p60.

Please refer to section Setting

HDMI and Component Output

Resolution)

1080i60, 720p60, 480p60, 480i60

(Selectable and default to 720p60.

Please refer to section Setting

HDMI and Component Output

Resolution)

480i60