Table of Contents
Advertisement
Gas Specifications
- Non-UK Only
Burner Injector
Open Burner
Low Fire Setting
Burner Aeration Setting
Burner Injector
Low Fire Setting
Griddle
Burner Aeration Setting
Pilot Injector
Supply Pressure
Burner Operating Pressure
Gas Regulator Cap Screw
- UK Only
Burner Injector
Open Burner
Low Fire Setting
Burner Aeration Setting
Burner Injector
Low Fire Setting
Griddle
Burner Aeration Setting
Pilot Injector
Supply Pressure
Burner Operating Pressure
Gas Regulator Cap Screw
Appliance Classification
Category:
Flue Type:
NOTE:
*
The burner operating pressure is to be measured at the manifold test point with two burners
operating at the 'High' setting. The operating pressure is ex-factory set through the appliance
regulator and is not to be adjusted, apart from when carrying out gas conversion. (Refer to the
'Gas Conversion' section for details).
Part 6
Gas Conversion
Natural. Gas
Ø 2.10 mm
¾ turn open
16 mm open.
Ø 2.00 mm
/
5
1.13 - 3.40 kPa
Natural. Gas
¾ turn open
16 mm open.
/
5
10 mbar (*)
II
2H3P.
A
1.
16
LP Gas (Propane)
Ø 1.30 mm
¼ turn open
c.c.w.
16 mm open.
Ø 1.25 mm
turn open
/
3
8
8
c.c.w.
Fully open.
Fully open.
0.35
2.75 - 4.50 kPa
1.0 kPa (*)
2.6 kPa (*)
Propane
(G20)
Ø 1.90 mm
Ø 1.20 mm
¼ turn open
c.c.w.
16 mm open.
Ø 2.00 mm
Ø 1.25 mm
turn open
/
3
8
8
c.c.w.
Fully open.
Fully open.
0.35
20 mbar
37 mbar
28 mbar (*)
c.c.w.
turn open
c.c.w.
0.23
(G31)
c.c.w.
turn open
c.c.w.
0.23
Advertisement
Table of Contents
