Channel Add/Delete; Sleep Timer - Samsung CS2Z45ZGQ Owner's Instructions Manual

Channel - Sort
This operation allows you to
TV
change the programme numbers From
To
of stored channels.
Store
This operation may be necessary
after using auto store.
Move
 From : C hannel number to be
changed.
 To : New channel number to be identified.
 Store : Confirmation the exchange of channel numbers.
Channel - Manual Store
You can store channels, including
TV
those received via cable networks.
Programme
Colour System : AUTO
When storing channels manually,
Sound System : BG
you can choose:
Search
Store
– Whether or not to store each of
the channels found
Move
– The programme number of
each stored channel which you
wish to identify
 Programme (Programme number to be assigned to a
channel)
 Colour System : A UTO / PAL / SECAM / NTSC4.43
/NTSC3.58
 Sound System : BG / DK / I / M
 Search (When you do not know the channel numbers)
The tuner scans the frequency range until the first channel
or the channel that you selected is received on the screen.
 Store (When you store the channel and associated
programme number)
➢
If there is no sound or abnormal sound, re-select the
sound standard required.
Channel - Add/Delete
You can exclude channels you
Sort
: P 1 have chosen from the channels
: P--
you scanned. When you scan
: ?
through the stored channels,
those you have chosen to skip are
not displayed. All of the channels
that you did not specifically
Adjust Return
choose to skip are displayed
during scanning.
Method:
ENTER : Select Added or Deleted.
Channel - Fine Tune
If the reception is clear, you do
not have to fine-tune the channel,
as this is done automatically
during the search and store
operation. If however the signal is
Manual Store
weak or distorted, you may have
: P 3
► to fine-tune the channel manually.
►
: 46MHz
Method:
: ?
◄/► : You can obtain a sharp and clear picture and good
sound quality.
Adjust Return
▲/▼  ENTER : You can reset the setting.
ENTER : You can memorise adjusted picture or sound.
Channel - LNA
When a weak broadcast signal
causes an unclear, noisy picture,
the "LNA" feature improves
the picture quality by setting to
"On". If you experience noise
on a certain noise on a certain
channel, set the the "LNA" to "On"
or "Off" for this channel, to obtain
the optimum picture.
Method:
ENTER : On/Off
TV Add/Delete
▲ More
P 1 : Added
P 2 : Added
P 3 : Added
P 4 : Added
P 5 : Added
▼ More
Move Enter Return
Fine Tune
P 1 0
Reset
Move Save
Adjust Return
Channel
TV
Auto Store
►
Manual Store
►
Add/Delete
►
Fine Tune
►
Sort
►
LNA : On
►
Move Adjust Return
English - 4
Setup - Time
TV
 Clock
Clock
You can set the television
On Timer - - : - - Off
clock so that the current time
Off Timer - - : - - Off
is displayed when pressing
the INFO button on the
remote control. You must also
Move
set the time if you wish to use
the automatic on or off timers.
 On Timer / Off Timer
You can set the On/Off timers so that the television will
switch on or off automatically at the time you select.
☛
You must set the clock first.
☛
Auto Power Off
When you set the timer "On", the TV will eventually turn
off, if no controls are operated for 3 hours after the TV was
turned on by timer. This function is only available in timer
"On" mode and prevents overheating, which may occur if a
TV is on for too long.

Sleep Timer

You can select a time period of between 30 and 180 minutes
after which the television automatically switches to standby
mode.
You can select these options simply by pressing TOOLS button
on the remote control to enter Sleep Timer.
If the sleep timer is not yet set, Off is displayed. If it is already
set, the remaining time before which the television switches to
standby mode is displayed.
Time
0 0 : 0 0
Enter Return