Table of Contents
Advertisement
Setting the Sleep Timer
Remote Control
Control Panel
4
E-
DB98-22420A-1.indd
14
The Sleep Timer can be used when you are cooling or heating your room to
switch the air conditioner off automatically after a period of 8 hours.
If you wish to switch the unit off at a specific time, refer to page 3.
Make sure that you have selected either COOL or HEAT mode.
Press the
button on the remote control
or
Press the
button on the unit until the SLEEP indicator lights up.
Result:
Each time you press a butoon, the unit beeps.
The "SLEEP" passes through the control panel for about 5
seconds and the"
The remaining time is displayed and decreased by hour
automatically to indicate the remaining time.
The air conditioner will be controlled as illustration below.
Cooling
When the temperature has
been increased by °C(after
hour), it is maintained
for 7 hours.
Heating
The temperature is decreased
by °C after hour.
When it has been decreased
by °C (after hour),the
temperature is maintained for
6 hours.
To Cancel the Sleep Timer
To cancel the timer, press:
on the remote control.
or
on the unit.
Result:
The unit beeps.
The SLEEP indicator is no longer displyed.
The air conditioner operates in the mode selected last.
"will be dispalyed.
Set
TEMP.
1hr
8hr
Start
Stop
time
time
2006-5-31
16:31:35
Advertisement
Table of Contents
