Port Capability Settings - D-Link DES-3350SR User Manual

Configure the following 802.1x port settings:
Parameter

Port Capability Settings

Existing 802.1x port settings are displayed and can be configured using the window below.
Click Port Capability Settings on the PAE Access Entity folder on the Configuration menu to open the 802.1X Capability
Settings window:
D-Link DES-3350SR Standalone Layer 3 Switch
Figure 7 - 62. Second 802.1X Authenticator Settings window
Port
AdmDir
Ctl Stat
PortControl
TxPeriod
QuietPeriod
SuppTimeout
ServerTimeout
MaxReq
ReAuthPeriod
ReAuth
Description
Port being configured for 802.1x settings.
From the pull-down menu, select whether
a controlled Port that is unauthorized will
exert control over communication in both
receiving and transmitting directions, or
just the receiving direction.
This displays whether a controlled Port
that is unauthorized will exert control
over communication in both receiving
and transmitting directions, or just the
receiving direction.
From the pull-down
forceAuthorized, forceUnauthorized or
auto − Force Authorized forces the
Authenticator of the port to become
Authorized. Force Unauthorized forces
the port to become Unauthorized.
Select the time to wait for a response
from a supplicant (user) to send EAP
Request/Identity packets.
Select the time
authentication failure and the start of a
new authentication attempt.
Select the time to wait for a response
from a supplicant (user) for all EAP
packets, except for the Request/Identity
packets.
Select the length of time to wait for a
response from a Radius server.
Select the maximum number of times to
retry sending packets to the supplicant.
Select the time
successive re-authentications.
Enable or disable re-authentication.
75
menu, select
interval between
interval between