Umb-Cast (Rx) - D-Link DES-3350SR User Manual

Parameter

UMB-cast (RX)

Figure 10 - 5. Rx Packets Analysis window (line graph for Unicast, Multicast, and Broadcast Packets)
D-Link DES-3350SR Standalone Layer 3 Switch
Time Interval [1s ]
Record Number [200]
Bytes
Packets
Show/Hide
Clear
View Table
View Line Chart
Description
Select the desired setting between 1s and 60s,
where "s" stands for seconds. The default
value is one second.
Select number of times the Switch will be
polled between 20 and 200. The default value
is 20.
Counts the number of bytes received on the
port.
Counts the number of packets received on the
port.
Check whether to display Bytes and Packets.
Clicking this button clears all statistics
counters on this window.
Clicking this button instructs the Switch to
display a table rather than a line graph.
Clicking this button instructs the Switch to
display a line graph rather than a table.
132