Table of Contents
Advertisement
MENUS LANGUAGE SELECTION, CHILD LOCK, CLOCK
SETTING, WAKE UP, NOISE REDUCTION
These functions are available in the Features menu (see description page 13).
CHILD LOCK
This function only allows the TV to be turned on using the remote control.
Once the user has set this CHILD LOCK to ON or OFF, it will remain in this
condition until the user changes it again.
WAKE UP
It is necessary to have set the clock (either manually or automatically) in
order to be able to use this function. If the clock is not set (--:-- is shown)
then the WAKE UP TIME and WAKE UP PROG. will not be selectable. The
default setting for WAKE TIME is in the "OFF" position. After each use (the
TV turns on according to the previous setting) the WAKE TIME will be
returned to the "OFF" position, conserving always the last time setting
entered ready for re-use.
CLOCK SETTING
The TV will automatically attempt to set the clock when powered on
(with the MAIN POWER button). It takes as reference information
embedded in the teletext signal of the channel defined by CLOCK
PROG. Therefore, automatic clock setting is only possible if teletext
is available on this channel.
If no time is captured automatically (the clock will show - - : - -), then
the TV will try again to set the clock whenever turning on from
standby mode.
Alternatively, the user can enter the time manually using the CLOCK
function. However, if this is done the clock will not be periodically updated
as would happen if the time is set automatically. We recommend that
MENUS DESCRIPTION
MAIN MENU
All menus are removed within 25 seconds if you don't press any button.
Press the remote control MENU button (A19) to display the main menu.
Then, you have the choice between several sub-menus:
If you want to Exit the main menu, press the MENU button (A19) a
second time.
- To select one of the sub-menus, use the remote control CURSOR UP
(A6), DOWN (A21) buttons.
- To enter the selected sub-menu, press the remote control OK button (A18).
Remark: In AV mode the INSTALL menu is not available, and will not be selectable.
HOW TO USE THE SUB-MENUS
The sub-menus referred to here are: PICTURE, SOUND, INSTALL, FEATURES.
- Select the desired Position
- The remote control
by using the remote
CURSOR LEFT (A7) or
control CURSOR UP (A6) or
RIGHT (A20) buttons if
DOWN (A21) buttons.
you want to modify the
function value
9
the user choose (if available) a CLOCK PROG which allows the time to be
updated automatically.
PROGRAM INFORMATION
This information (if available) can be presented at the same time as the
RECALL window, in the lower part of the screen and in red characters
(transparent background), if the PROG. INFO is set to ON. This is a status
information available on most channels that have teletext. It is under the
editorial control of the transmitting station, and can contain, for example,
the programme title.
DEFAULT ZOOM CONTROL
If the ZOOM control is set to AUTO (A15, see page 8, FORMAT SELECTION),
then the picture format presented is controlled by the received picture
format signalling data embedded in the transmission. In the absence of
this signalling data (as can often be the case) a default format must be
used. This default format can be selected by the ZOOM AUTO function.
LANGUAGE
This can be changed at any time by the user in the LANGUAGE menu
(accessed via the FEATURES menu).
- Adjustthe function using :
- The remote control
- Store (if needed) by
NUMBER 0...9 buttons (A3)
pressing the remote
to enter directly new data.
control OK button (A18).
PICTURE
SOUND
INSTALL
FEATURES
- Then Exit to main menu by
pressing the MENU button
(A19).
Advertisement
Table of Contents
