Page 1
Care Guide 22.5" Round Kettle Gri|| Kmart item No, 680=02701244=2 This Grii| is for Outdoor Use Only SAVE THESE |HSTRUCT|ONS! • Safety • Parts • Use and Care , Read and follow all Safety, Assembly, and Use and Care Instructions in this •...
Page 2
Tips and Features for safety and ease of use Verify that all parts are included with your grill before beginning assembly by checking the Parts List inside. If all parts are not included, please e-mail us at custornerselwice@vdgus.com or call us toll free 1-866-561-0731 (M-F 8:30 - 4:30) CT.
Page 5
Remove all the parts from the carton and lay them out on a smooth, clean surface. Verify the presence of all parts by comparing to Hardware and Parts Lists on previous pages. Do not throw away any of the packaging until you locate all the parts.
Page 6
STEP 3: Beforeattachingwire shelf(J)makesurethatthe sidewith short endsis facingthe t?ont.Attach wire shelf(J) to stationarylegs(F) by insertingtheshort endsof wire shelf(J) throughholesin front legs(F), andscrew2 plasticnuts ontoendtips to secure. D o not fully tighten until finishingthe grill assembly. Attachwire shelf(J)to wheellegs(G) by insertingthe long endsof wire shelf(J) thoughwheellegs(G), 2 wheels(I), 2 plastic washers (7) andscrew2 hex locknuts(5) onto endtips to secure.
Page 7
STEP 5: Hook bottom of grid height adjusters (N) to side of charcoal grid (D). Slide grid height adjusters (N) through the large openings on the side of cooking grid (C). Insert cooking grid/charcoal grid assembly into bottom bowl (B). Place top lid (A) on top of bottom lid.
Page 8
ORDER PARTS 200423N 210329N BOTTOM BOWL 300523N COOKING GRID 610201N CHARCOAL GRID 230104N CATCHER 300524N STATIONARY 300525N WHEEL 220102N t EACH LID VENT ASSEMBLY 500200N WHEEL 300483N WIRE SHELF(LEG SUPPORT) 300467N BOWL LID BRACKET 220002N HANDLE 220018N GRID HEIGHT ADJUSTER 240100N 1 - 9 HARDWARE PACK...