Advertisement
Remove
all the parts
from the carton
and lay them out on a smooth,
clean
surface.
Verify the presence
of all
parts
by comparing
to Hardware
and Parts
Lists on previous
pages.
Do not throw
away any of the packaging
until you locate
all the parts.
STEP 1: Attach lid vent asembly
(H)
by inserting
damper
bolt (3) through
lid vent assembly
(H), and lid (A).
Inside of lid, place 1 fiber washer
(8),
1 winged
nut (4) onto damper
bolt (3)
and tighten.
i
Attach lid handle'M"
b insertin
2
handle bolts (2) through
2 metal
washers
(9), lid bracket
(L), 2 fiber washers
(8),
J_
lid (A), 2 fiber washers
(8) and into lid handle
(M).
STEP 2: Attach
stationary
legs (F) of grill by inserting
a leg bolt (1)
through
metal washer
(9), bottom
bowl (B), leg bowl (K), and screwing
bolt (1) into stationary
leg (F). Repeat procedure
for the other stationary
leg,
Do not fully tighten
until finishing
the grill assembly.
Attach
wheel legs (G) of grill by inserting
a leg bolt (1) through
metal washer
(9),
bottom bowl (B), leg bowl (K), and screwing
bolt (1) into wheel leg (G).
Repeat
procedure
for the other wheel leg.
Do not fully tighten
until finishing
the grill assembly.
\
Bottom
Front
of Grill
Customer
Service-
i -866-561-0731
Page 4
Advertisement
