Hide thumbs Also See for K 3.86 M:

Advertisement

English
2
EspaSol
19
Fran_ais
37
5,,961-774 02106

Advertisement

Table of Contents
loading

Summary of Contents for Kärcher K 3.86 M

  • Page 1 English EspaSol Fran_ais 5,,961-774 02106...
  • Page 2 MODEL OVERVIEW IMPORTANT SAFETY INSTRUC- 4 - 5 TIONS Call: 01-800-024-13-t3 for help or visit ASSEMBLY INSTRUCTIONS ou r website; www.karcher°com,mx OPERATING INSTRUCTIONS 7 - 8 USING THE ACCESSORIES WORKING WiTH DETERGENTS 9 - 10 z_ DANGER TAKING A BREAK indicates "an imminently hazardous .sit-...
  • Page 3 1 Power cord with Ground Fault Circuit 10 Trigger gun interrupter (GFCI) 1 1 Trigger gun safety lock 2 High pressure outlet 12 Vario Power Spray wand 30NIOFF switch 13 Dirtblaster_ (Rotating spray wand) 4 Water inlet with garden hose con- z_ CAUTION nector (not shown) This unit has been designed for use with...
  • Page 4 WARNING! physical injuries to the operator and When using this product basic irreversible damage to the machine.. precautions should always be m To reduce the risk of electrocution, followed, including the following: keep all connections dry and off the =, Read all the instructions before us- ground.
  • Page 5 This product is supplied with a Ground z_ CAUTION Fault Circuit Interrupter (GFCI) built into When connecting the water inlet to the the power cord plug, This device pro- water supply mains, local regulations of vides additional protection from the risk your water company must be observed,.
  • Page 6 STEP 3: Place detergent tank into compart- A Philips Screwdriver, medium size ment and attach cap with detergent (not supplied) dosing valve and detergent suction for final assembling the unit.. tube. B Screwdriver, small size (not sup- plied) for connecting high pressure hose and trigger gun.
  • Page 7: Operating

    --) STEP -) STEP 4: Connect the high pressure hose to Connect garden hose to the cold wa- ter source and turn water on com- the unit's high pressure outlet pletely. • 9, STEP 5: -) STEP 2: Plug the Ground Fault Circuit Inter- Insert the spray wand of your choice rupter (GFCI) into a receptacEe_ into the trigger gun..
  • Page 8 STEP 6: STEP 7: Unlock the trigger gun safety lock Turn on the high pressure washer Trigger the gun to eliminate trapped air, wait for a steady flow of water to The motor' starts only if the trigger emerge from the spray nozzle of the gun is pulled and shuts off when the trigger is released.
  • Page 9: Working With Detergents

    For K,_rcher Detergents, check your retailer or visit our website: www karcher-usa comlhome The following K_ircher detergents are available: One Gallon ready to use [] All Purpose &...
  • Page 10 Z_ CAUTION Ammonia products Acid-based products Never use; These chemicals will harm the unit and Bleach, Chlorine products and other corrosive chemicals witl damage the surface being cleaned Use of these items will void the war- Liquids containing solvents (i,e. rarity, paint thinners, gasoline, oils) Td-sodium phosphate products...
  • Page 11 -> STEP 1: -> STEP 5: Turn the switch to OFF (0) position Disconnect the high pressure hose and unplug cord from outlet from the high pressure outlet --_ STEP 2: '-) STEP 6: Turn off the water source, Release trigger and engage gun ->...
  • Page 12 -_ 3: Do not allow high pressure hose sembly and accessories. to become kinked. Karcher also recommends the regular 4: Store the machine and accesso- practice of using a pump protector like ries in a room which does not reach "K_rcher Pump Guard"...
  • Page 13 (with or without detergent).. Pre-rinse (with or without detergent). Pre-rinse deck and surrounding area with fresh cleaning surface with fresh water If us- water. If using K_rcher Deck Wash, ap- ing K_rcher Pressure Wash or Degreas- ply to surface at low pressure For best er, apply to surface at low pressure For results, limit your work area to smaller...
  • Page 14 K_rcher Pressure Wash or Degreas- For additional cleaning tips, visit our er, apply detergent at low pressure.. website at www.karcher-usa.coml Allow Pressure Wash to remain on sur- home face 1-3 minutes Do not allow deter- gent to dry on surface..
  • Page 15 2300 PSI, (bay- of water out of a standing source, such onet) as a barrel or bucket.. Fits most Karcher Part Noo 2_640-743.0 pressure washers up to 2300 PSI, Part No. 2.637-214.0...
  • Page 16 Connects direct- Karcher's T 100.. It saves time by clean- ly to the trigger gun of most Karcher ing a one foot wide area gently as it hov- pressure washers up to 2300 PSI.
  • Page 17 /!k CAUTION Disconnect the machine from the power source before making any repair, Symptom Cause Solution Moto# will n6t sta_ onioff Switch:'is 'in the' ;'oFF" "TurS:':'switc5io the "ON" (I) p0si: (O) position., tion Power cord is not plugged in. Plug in power cord.. Electrical outlet does not sup- Try a different outlet ply adequate power..
  • Page 18 Call Customer Support drops perminuteis worn permissible). Oil Drip. Oil seals are damaged or Call Customer Support worn. K_ircher Customer Service Call: 1-800-465-4980 for help or visit Call: 1-800-537-4129 for help or visit ou r website: w'_nt#.karcher.ca our website: www.karcher-usa.com/home English...

Table of Contents