ASROCK IMB-170 User Manual page 41

Use this to configure long duration power limit in watts.
Long Duration Maintained
Use this to configure the time window which the long duration
power is maintained.
Short Duration Power Limit
Use this to configure short duration power limit in watts.
Primary Plane Current Limit
Use this to configure the maximum instantaneous current allowed
for the primary plane.
Secondary Plane Current Limit
Use this to configure the maximum instantaneous current allowed
for the secondary plane.
Intel Hyper Threading Technology
To enable this feature, a computer system with an Intel proces-
sor that supports Hyper-Threading technology and an operating
system that includes optimization for this technology, such as
®
Microsoft Windows
if using Microsoft
sion 2.4.18 or higher. This item will be hidden if the installed CPU
does not support Hyper-Threading technology.
Active Processor Cores
Use this to select the number of cores to enable in each proces-
sor package. The default value is [All].
Enhanced Halt State (C1E)
All processors support Halt State (C1). The C1 state is supported
through the native processor instructions HLT and MWAIT and
requires no hardware support from the chipset. In C1 power state
the processor maintains the context of the system caches.
CPU C3 State Support
Use this to enable or disable CPU C3 report to OS.
CPU C6 State Support
Use this to enable or disable CPU C6 report to OS.
Package C State Support
Configure options that will be programmed into C State package
limit register. The default value is [Auto].
CPU Thermal Throttling
® TM
XP / Vista / 7 is required. Set to [Enabled]
® ®
Windows XP, Vista
41
TM
, 7, or Linux kernel ver-