Dual Monitor - ASROCK IMB-170 User Manual

2.10 Dual Monitor

Dual Monitor
This motherboard supports dual monitor. With the internal VGA output
support DisplayPort, DVI-I (D-Sub Port for IMB-170-V), HDMI and LVDS,
you can enjoy dual monitor without installing any add-on VGA cards to
this motherboard . This motherboard also provides independent display
controllers for the DisplayPort, DVI-I, HDMI and LVDS to support dual VGA
output so that the DisplayPort, DVI-I, HDMI and LVDS can drive same or
different display contents.
To enable dual monitor, please follow the steps below:
1. Connect monitor cables to the respective ports on the I/O panel or
motherboard.
DisplayPort
2. If you have installed the onboard VGA driver from our support CD to
your system already, you can freely enjoy dual monitor after your system
boots. If you haven't installed the onboard VGA driver yet, please install
the onboard VGA driver from our support CD to your system and restart
your computer.
1. DisplayPort, DVI-I, HDMI and LVDS monitors cannot all be
enabled at the same time. You can only choose two of them.
DVI-I port
LVDS header
31
HDMI