Page 3
WARNING THIS PRODUCT CONTAINS A BUTTOON BATTERY If swallowed, a button battery can cause serious injury or death. Please keep batteries out of sight or reach of children. CALIFORNIA, USA ONLY The Lithium battery adopted on this motherboard contains Perchlorate, a toxic substance controlled in Perchlorate Best Management Practices (BMP) regulations passed by the California Legislature.
If you require technical support related to this motherboard, please visit our website for specific information about the model you are using. https://www.asrockind.com/support/index.asp 1.1 Package Contents ASRockInd IMB-1713 Motherboard (ATX (12-in x 9.6-in x 1.4-in, 30.5 cm x 24.4 cm x 3.6 cm)) • Gift Package...
1.2 Specifications Form Factor Dimensions ATX (12-in x 9.6-in x 1.4-in, 30.5 cm x 24.4 cm x 3.6 cm) Intel® 13th/12th Gen (Raptor Lake-S/Alder Lake-S) Core™ Processors, up to 125 W Processor Chipset Intel® H610 System Socket LGA1700 BIOS AMI SPI 256 Mbit 1 x PCIe x16 (Gen5) Expansion PCIe...
Page 8
IMB-1713 2 x USB 3.2 Gen1 (1 x USB 3.1 header) 3 x USB 2.0 (1 x 2.54 pitch header, 1 x USB 2.0 Type-A vertical connector) Internal COM3, COM4, COM5, COM6 (RS-232) Connector Parallel 1 (shared with GPIO) GPIO 8 x GPI, 8 x GPO (shared with LPT header) TPM 2.0 onboard IC...
1.4 I/O Panel DisplayPort (DP2) USB 2.0 Ports (USB2_5_6) Com Port (COM1) (RS232/422/485)* 10 USB 3.2 Gen2 Ports (USB3_1_2) Com Port (COM2) (RS232/422/485)* 11 D-Sub Port (VGA1) RJ45 LAN Port (LAN2)** 12 PS/2 Keyboard/Mouse Port RJ45 LAN Port (LAN1)*** (PS2_KB_MS1) Line In (Blue) 13 HDMI Port (HDMI1) Line Out (Green)
Chapter 2 Installation This is a ATX (12-in x 9.6-in x 1.4-in, 30.5 cm x 24.4 cm x 3.6 cm) form factor moth- erboard. Before you install the motherboard, study the configuration of your chassis to ensure that the motherboard fits into it. Make sure to unplug the power cord before installing or removing the motherboard.
IMB-1713 2.3 Installation of Memory Modules IMB-1713 provides two 288-pin DDR5 (Double Data Rate 5) Long-DIMM slots, and supports Dual Channel Memory Technology. For dual channel configuration, you always need to install identical (the same brand, speed, size and chip-type) DDR5 DIMM pairs.
Page 15
Open the DIMM slot latches. Aligh the notch. Carefully press down until the DIMM slides into the slot. The latches snap back into place.
IMB-1713 2.4 Expansion Slots There are 3 PCI Express slots, 4 PCI slots and 1 M.2 socket on this motherboard. PCIE slots: PCIE1 (PCIE 5.0 x16 slot) is used for PCI Express x16 lane width cards. PCIE2 (PCIE 3.0 x4 slot) is used for PCI Express x 4 lane width cards.
2.5 Jumpers Setup The illustration shows how jumpers are setup. When the jumper cap is placed on pins, the jumper is “Short.” If no jumper cap is placed on pins, the jumper is “Open. ” The illustration shows a 3-pin jumper whose pin1 and pin2 are “Short”...
Page 18
IMB-1713 ATX/AT Mode Jumper Setting Description ATX Mode (2-pin SIO_AT1) Open (see p. 4, No. 15) (Default) Short AT Mode The header provides auto boot function when AC power on. If you need the function, short SIO_AT1 pin 1 and pin 2.
Page 19
Digital Input / Output Default Value Setting Setting Description Pull-High (3-pin JGPIO_SET1) (Default) (see p. 4, No. 21) Pull-Low The header is used for GPIO default value setting for either pull high or pull low. Pulling the header to a high/low value means the voltage is anchored to VCC/GND, in a stable, non-floating state.
IMB-1713 2.6 Onboard Headers and Connectors Onboard headers and connectors are NOT jumpers. Do NOT place jumper caps over these headers and connectors. Placing jumper caps over the headers and connectors will cause per- manent damage to the motherboard! Chassis FAN Connectors (+12V)
Page 21
CPU Fan Connector (+12V) Signal Name FAN_SPEED_CONTROL (4-pin CPU_FAN1) CHA_FAN_SPEED (see p. 4, No. 5) +12V This motherboard provides 4-pin CPU fan (Smart Fan) speed control function. The 3-pin CPU fan can work successfully without the fan speed control function. When you connect the 3-pin CPU fan to the CPU fan connector on this motherboard, please connect it to pin 1 to pin 3.
Page 22
IMB-1713 USB 3.2 Gen1 Header Signal Name SiSignal Name Vbus (19-pin USB3_3_4) Vbus IntA_P1_SSRX- (see p. 4, No. 10) IntA_P0_SSRX- IntA_P1_SSRX+ IntA_P0_SSRX+ IntA_P1_SSTX- IntA_P0_SSTX- IntA_P1_SSTX+ IntA_P0_SSTX+ IntA_P1_D- IntA_P0_D- IntA_P1_D+ IntA_P0_D+ There is one USB 3.2 Gen1 header on this motherboard. This header can support two USB 3.2 Gen1 ports with maximum power current 0.9A per port.
Page 23
Printer Port / GPIO Header (25-pin LPT_GPIO1) (see p. 4, No. 18) Printer Port GPIO Signal Name Signal Name Signal Name Signal Name STB# AFD# SIO_GP77 SIO_GP76 Input SPD0 ERROR# SIO_GP80 SIO_GP75 SPD1 PINIT# SIO_GP81 SIO_GP74 SPD2 SLIN# SIO_GP82 SIO_GP73 SPD3 SIO_GP83 JGPIOPWR...
Page 24
IMB-1713 ESPI Header Signal Name Signal Name ESPI_CLK (17-pin ESPI1) ESPI_CS# SMB_CLK_MAIN ESPI_RST# SMB_DATA_MAIN (see p. 4, No. 19) ESPI_IO3 ESPI_IO2 ESPI_IO1 ESPI_IO0 +3VSB ESPI_ALERT# The header is reserved for Port 80 code display and debugging purposes. USB 2.0 Header...
Page 25
HDLED (Hard Drive Activity LED): Connect to the hard drive activity LED on the chassis front panel. The LED is on when the hard drive is reading or writing data. The front panel design may differ by chassis. A front panel module mainly consists of power switch, reset switch, power LED, hard drive activity LED, speaker and etc.
2.7 I/O Ports DisplayPorts Signal Name Signal Name ML_LANE_0P (20-pin DP1, DP2) ML_LANE_0N ML_LANE_1P (see p. 6, No. 1, 14) ML_LANE_1N ML_LANE_2P ML_LANE_2N ML_LANE_3P ML_LANE_3N HDMI_DNG_ DETECT AUX_CHP AUX_CHN Hot Plug DP_PWR The DP connnectors support DisplayPort 1.4a and DP++. The max resolution is up to 4096 x 2160@60Hz.
Page 28
IMB-1713 LAN2: The RJ45 connector design with INTEL i219V for 10/100/1000 Mbps speed and supports 1G LAN. LAN1: The RJ45 connector design with Realtek RTL8125 for 10/100/1000/2500 Mbps speed.It can also providing PoE function (30W). There are two LEDs next to the LAN ports. Please refer to the table below for the LAN port LED indications.
Page 29
USB 3.2 Gen2 Ports Signal Name USB_PWR (4-pin USB3_1_2) USB_D- (see p. 6, No. 10) USB_D+ SSRX- SSRX+ SSTX- SSTX+ Two USB 3.2 Gen2 ports support the maximum current 0.9A per port. USB 3.2 Gen2 ports connect devices such as external storage devices with data transfer speeds up to 10 Gbps.
Chapter 3 UEFI SETUP UTILITY 3.1 Introduction ASRock Industrial UEFI (Unified Extensible Firmware Interface) is a BIOS utility which offers tweak-friendly options in an advanced viewing interface. The UEFI system works with a USB mouse and offers users a faster, sleeker experience.
3.1.2 UEFI Menu Bar The top of the screen has a menu bar with the following selections: Main For setting system time/date information For advanced system configurations Advanced H/W Monitor Displays current hardware status Security For security settings Boot For configuring boot settings and boot priority Exit Exit the current screen or the UEFI Setup Utility Because the UEFI software is constantly being updated, the following UEFI setup...
IMB-1713 3.1.3 Navigation Keys Use < > key or < > key to choose among the selections on the menu bar, and use < > key or < > key to move the cursor up or down to select items, then press <Enter>...
3.2 Main Screen (Advanced Mode) When you enter the UEFI SETUP UTILITY, the Main screen will appear and display the system overview. Because the UEFI software is constantly being updated, the following UEFI setup screens and descriptions are for reference purpose only, and they may not exactly match what you see on your screen.
IMB-1713 3.3 Advanced Screen In this section, you may set the configurations for the following items: CPU Configuration, Chipset Configuration, Storage Configuration, Super IO Configura- tion, ACPI Configuration, USB Configuration, Trusted Computing and Thunder- bolt (TM) Configuration. Setting wrong values in this section may cause the system to malfunction.
3.3.1 CPU Configuration Intel Hyper Threading Technology Intel Hyper Threading Technology allows multiple threads to run on each core, so that the overall performance on threaded software is improved. Configuration options: [Enabled] [Disabled] Active Processor P-Cores This allows you to select the number of cores to enable in each processor package. Active Processor E-Cores This allows you to select the number of E-Cores to enable in each processor package.
Page 36
IMB-1713 Enhanced Halt State (C1E) The option allows you to enable Enhanced Halt State (C1E) for lower power consumption. Configuration options: [Enabled] [Disabled] Package C State Support The option allows you to enable CPU, PCIe, Memory, Graphics C State Support for power saving.
Page 37
Intel Turbo Boost Technology Intel Turbo Boost Technology enables the processor to run above its base operating frequency when the operating system requests the highest performance state. The default value is [Enabled]. Configuration options: [Enabled] [Disabled] CPU Thermal Throttling CPU Thermal Throttling allows you to enable CPU internal thermal control mecha- nisms to keep the CPU from overheating.
IMB-1713 3.3.2 Chipset Configuration Primary Graphics Adapter The option allows you to select a primary VGA. Configuration options: [Onboard] [PCI Express] (Options vary when you have installed a graphics card on your motherboard.) Above 4G Decoding The option allows you to enable or disable above 4G Memory Mapped IO decoding.
Page 39
PCIE1 Link Speed The option allows you to configure PCIE1 Slot Link Speed. Auto mode is optimizing for overclocking. Configuration options: [Auto] [Gen1] [Gen2] [Gen3] [Gen4] [Gen5] (Options vary depending on your motherboard.) PCIE2 Link Speed The option allows you to configure PCIE2 Slot Link Speed. Auto mode is optimizing for overclocking.
Page 40
IMB-1713 Onboard LAN1 This allows you to enable or disable the Onboard LAN1 feature. Onboard LAN2 This allows you to enable or disable the Onboard LAN2 feature. Onboard HD Audio Onboard HD Audio allows you to enable or disable the onboard HD audio controller.
3.3.3 Storage Configuration SATA Controller(s) The option allows you to enable or disable the SATA controllers. Configuration options: [Enabled] [Disabled] SATA Mode Selection AHCI supports new features that improve performance. Configuration option: [AHCI] Hybrid Storage Detection and Configuration Mode The option allows you to select Hybrid Storage Detection and Configuration Mode. Configuration options: [Dynamic Configuration for Hybrid Storage Enable] [Disabled] SATA Aggressive Link Power Management...
Page 42
IMB-1713 Hard Disk S.M.A.R.T. S.M.A.R.T stands for Self-Monitoring, Analysis, and Reporting Technology. It is a monitoring system for computer hard disk drives to detect and report on various indicators of reliability. Configuration options: [Enabled] [Disabled]...
3.3.4 Super IO Configuration COM1 Configuration Use this to set parameters of COM1. Type Select Use this to select COM1 port type: [RS232], [RS422] or [RS485]. COM2 Configuration Use this to set parameters of COM2. Type Select Use this to select COM2 port type: [RS232], [RS422] or [RS485]. COM3 Configuration Use this to set parameters of COM3.
Page 44
IMB-1713 COM6 Configuration Use this to set parameters of COM6. Parellel Port The option enables or disables the Parallel port. Device Mode Select the device mode according to your connected device. Change Settings Select the address of the Parallel port.
3.3.5 ACPI Configuration Suspend to RAM Suspend to RAM allows you to select [Disabled] for ACPI suspend type S1. It is recommended to select [Auto] for ACPI S3 power saving. Configuration options: [Auto] [Disabled] PCIE Devices Power On Use this item to enable or disable PCIE devices to turn on the system from the power-soft-off mode.
3.3.7 Trusted Computing NOTE: Options vary depending on the version of your connected TPM module. Security Device Support Security Device Support allows you to enable or disable BIOS support for security device. O.S. will not show Security Device. TCG EFI protocol and INT1A interface will not be available.
Page 48
IMB-1713 Platform Hierarchy This item allows you to enable or disable Platform Hierarchy. Configuration options: [Enabled] [Disabled] Storage Hierarchy This item allows you to enable or disable Storage Hierarchy. Configuration options: [Enabled] [Disabled] Endorsement Hierarchy This item allows you to enable or disable Endorsement Hierarchy.
IMB-1713 3.4 Hardware Health Event Monitoring Screen This section allows you to monitor the status of the hardware on your system, including the parameters of the CPU temperature, motherboard temperature, fan speed, chassis fan speed, and the critical voltage. NOTE: Options vary depending on the features of your motherboard.
Page 51
Case Open Feature This item allows you to enable or disable case open detection feature. The default is value [Disabled]. Clear Status This option appears only when the case open has been detected. Use this option to keep or clear the record of previous chassis intrusion status.
IMB-1713 3.5 Security Screen In this section you may set or change the supervisor/user password for the system. You may also clear the user password. Supervisor Password Set or change the password for the administrator account. Only the administrator has the authority to change the settings in the UEFI Setup Utility. Leave it blank and press enter to remove the password.
Page 53
3.6 Boot Screen This section displays the available devices on your system for you to configure the boot settings and the boot priority. Boot Option #1 The item allows you to set the system boot order. Boot From Onboard LAN The item allows the system to be waked up by the onboard LAN.
Page 54
IMB-1713 Full Screen Logo [Enabled] Select this item to display the boot logo. [Disabled] Select this item to show normal POST messages.
Page 55
3.7 Exit Screen Save Changes and Exit When you select this option, the following message “Save configuration changes and exit setup?” will pop out. Select [Yes] to save the changes and exit the UEFI SETUP UTILITY. Discard Changes and Exit When you select this option, the following message “Discard changes and exit setup?”...