Table of Contents
Advertisement
3.3.2 Chipset Configuration
Set Panel Type by
Use this to configure Set Panel Type. The default value is [UEFI Setup].
Panel Type Selection
Use this to select panel type. The default value is [1366x768/18-bit/1-ch/
LED].
ACPI HPET Table
Use this item to enable or disable ACPI HPET Table. The default value is
[Enabled]. Please set this option to [Enabled] if you plan to use this moth-
erboard to submit Windows
Restore on AC/Power Loss
This allows you to set the power state after an unexpected AC/power
loss. If [Power Off] is selected, the AC/power remains off when the power
recovers. If [Power On] is selected, the AC/power resumes and the system
starts to boot up when the power recovers.
Onboard HD Audio
Select [Auto], [Enabled] or [Disabled] for the onboard HD Audio feature. If
you select [Auto], the onboard HD Audio will be disabled when PCI Sound
Card is plugged.
Front Panel
Select [Auto] or [Disabled] for the onboard HD Audio Front Panel.
Onboard LAN1
This allows you to enable or disable the "Onboard LAN1" feature.
Onboard LAN2
This allows you to enable or disable the "Onboard LAN2" feature.
®
certification.
31
Advertisement
Table of Contents
