Driver Installation Guide; Installing Windows ® 7 On Sata / Sata2 Hdds - ASROCK IMB-140 User Manual

2.11 Driver Installation Guide

To install the drivers to your system, please insert the support CD to your optical
drive first. Then, the drivers compatible to your system can be auto-detected and
listed on the support CD driver page. Please follow the order from top to bottom to
install those required drivers. Therefore, the drivers you install can work properly.
2.12 Installing Windows
If you want to install Windows
steps below.
Using SATA / SATA2 HDDs with NCQ function
STEP 1: Set up UEFI.
A. Enter UEFI SETUP UTILITY
B. Set the option "SATA Mode" to [AHCI].
STEP 2: Install Windows
Using SATA / SATA2 HDDs without NCQ function
STEP 1: Set up UEFI.
A. Enter UEFI SETUP UTILITY
B. Set the option "SATA Mode" to [IDE].
STEP 2: Install Windows
®
7 on SATA / SATA2 HDDs
®
7 OS on your SATA / SATA2 HDDs, please follow the
Advanced screen
®
7 OS on your system.
Advanced screen
®
7 OS on your system.
26
Storage Configuration.
Storage Configuration.