Usb Configuration - Asus P6X58D-E User Manual

Onboard 1394 Controller [Enabled]
[Enabled]
[Disabled]
Marvell 9128 Controller [IDE Mode]
Allows you to select the Marvell 9128 controller operating mode.
[Disabled]
[IDE Mode]
[AHCI Mode]
3.6.4

USB Configuration

The items in this menu allow you to change the USB-related features. Select an item and
press �Enter�� to display the configuration options.
USB Configuration
USB Devices Enabled:
1 Mouse
USB Functions
NEC USB 3.0 Controller
USB 2.0 Controller
USB 2.0 Controller Mode
BIOS EHCI Hand-Off
Legacy USB Support
The USB Devices Enabled item shows the auto-detected values. If no USB device is
detected, the item shows None.
USB Functions [Enabled]
[Enabled]
[Disabled]
The following two items appear only when you set USB Functions to [Enabled].
NEC USB 3.0 Controller [Enabled]
[Enabled]
[Disabled]
USB 2.0 Controller [Enabled]
[Enabled]
[Disabled]
3-24
Enables the onboard IEEE 1394a controller.
Disables the controller.
Disables the controller.
Set to [IDE Mode] when you want to use the Serial ATA hard disk drives as
Parallel ATA physical storage devices.
Set to [AHCI Mode] when you want the SATA hard disk drives to use the
AHCI (Advanced Host Controller Interface). The AHCI allows the onboard
storage driver to enable advanced Serial ATA features that increases
storage performance on random workloads by allowing the drive to
internally optimize the order of commands..
P6X58D-E BIOS Setup
Advanced
[Enabled]
[Enabled]
[Enabled]
[HiSpeed]
[Enabled]
[Auto]
Enables the USB Host Controllers.
Disables the controllers.
Enables the USB 3.0 controller.
Disables the controller.
Enables the USB 2.0 controller.
Disables the controller.
Options
Disabled
Enabled
Chapter 3: BIOS setup