Xtreme Phase Full Power Mode; Bclk Frequency - Asus P6X58D-E User Manual

The configuration options for the following sub-items vary depending on the DIMMs you
install on the motherboard.
DRAM O.C. Profile [DDR3-1805MHz]
This item appears only when you set the Ai Overclock Tuner item to [D.O.C.P.] and allows
you to select a DRAM O.C. profile, which applies different settings to DRAM frequency,
DRAM timing and DRAM voltage. Configuration options: [DDR3-1805MHz] [DDR3-2006MHz]
eXtreme Memory Profile [Disabled]
This item appears only when you set the Ai Overclock Tuner item to [X.M.P.] and allows you
to select the X.M.P. mode supported by your memory module.
[Disabled]
[High Performance]
[High Frequency]
To obtain the best performance of the X.M.P. DIMM or 1600MHz DIMM, install only one
DIMM on each memory channel.
3.5.2 CPU Ratio Setting [Auto]
Allows you to set the ratio between the CPU Core Clock and the BCLK Frequency. Use <+>
and <-> keys to adjust the ratio. The valid value ranges vary according to your CPU model.
3.5.3 Intel(R) SpeedStep(TM) Tech [Enabled]
[Enabled] The CPU speed is controlled by the operating system.
[Disabled] The CPU runs at its default speed.
3.5.4 Intel(R) TurboMode Tech [Enabled]
[Enabled] Allows processor cores to run faster than marked frequency in specific
condition.
[Disabled] Disables this function.
3.5.5 Xtreme Phase Full Power Mode [Auto]
[Auto] Automatic configuration.
[Enabled] Enables Full Power Mode to ensure the best CPU overclocking
performance.
The following two items appear only when you set the Ai Overclock Tuner item to [Manual],
[D.O.C.P.] or [X.M.P.].
3.5.6 BCLK Frequency [XXX]
Allows you to adjust the CPU operating frequency to enhance the system performance. Use
the <+> and <-> keys to adjust the value. You can also key in the desired value using the
numeric keypad. The values range from 100 to 500.
ASUS P6X58D-E
You are not allowed to select the memory profile.
Allows your memory to work in high performance.
Allows your memory to work in high frequency.
3-13