Asus Ez Flash 2 Utility - Asus P6X58D-E User Manual

3.2.2

ASUS EZ Flash 2 utility

The ASUS EZ Flash 2 feature allows you to update the BIOS without having to use a
bootable floppy disk or an OS-based utility.
Before you start using this utility, download the latest BIOS from the ASUS website
at www.asus.com.
To update the BIOS using EZ Flash 2:
1. Insert the USB flash disk that contains the latest BIOS file to the USB port, and then
launch EZ Flash 2 in any of these two ways:
• Press <Alt> + <F2> during POST to display the following.
Enter the BIOS setup program. Go to the Tools menu to select EZ Flash 2 and
•
press <Enter> to enable it.
FLASH TYPE:
Current ROM
BOARD:
VER:
DATE:
PATH: A:\
A:
Note
[Enter] Select or Load
[Up/Down/Home/End] Move
2. Press �Tab�� to switch between drives until the correct BIOS file is found. When Press �Tab�� to switch between drives until the correct BIOS file is found. When
the correct BIOS file is found, EZ Flash 2 performs the BIOS update process and
automatically reboots the system when done.
•
•
Ensure to load the BIOS default settings to ensure system compatibility and stability. Select
the Load Setup Defaults item under the Exit menu. See section 3.10 Exit Menu for
details.
3-4
ASUSTek EZ Flash 2 BIOS ROM Utility V3.44
WINBOND W25P/X16
P6X58D-E
0101
03/04/2010
[Tab] Switch
[B] Backup
This function can support devices such as a USB flash disk with FAT 32/16 format and
single partition only.
DO NOT shut down or reset the system while updating the BIOS to prevent system
boot failure!
Update ROM
BOARD: Unknown
VER: Unknown
DATE: Unknown
[V] Drive Info
[Esc] Exit
When
Chapter 3: BIOS setup