Condensing Unit Rigging - Heatcraft Refrigeration Products II Installation & Operating Instructions Manual

Condensing Unit Rigging

Figure 5. Condensing Unit Rigging
Adequate rigging measures must be
taken to support unit weight and to
protect the unit from damage during
unloading and placement process.
Rigging holes have been provided in
legs and under the unit compressor
compartment frame to assist.
Rigging Holes
Spreader bars may be used to protect
unit from damage.
Disconnect
Refer to the
building plans
for construction
Top of Roof
details.
Roof Opening Curb
Flashed and
Refer to the
Sealed
building plans
for construction
details.
6