Cable Separation And Routing - Sirius Satellite Radio Stratus 4 User Manual

Cable Separation and Routing

FCC Information
The satellite antenna cable, FM extender antenna (FEA) cable and cigarette lighter
adapter (CLA) power cable must be appropriately separated and routed for your radio
to be compliant with federal regulations.
LEFT RIGHT
Step 1
The connections on your vehicle dock are
clearly marked. Install your vehicle dock
and connect the antenna cable into the
connection labeled "ANT", the CLA power
cable into the power connection marked
Power FEA Antenna
"PWR" (or 5VDC) and the FEA cable
into the connection marked "FM OUT".
PWR
AUDIO
(See Figure 17.)
Figure 17
Step 2
It is important that you keep the three cables as separate from each other as pos-
sible and that you keep the two antenna cables away from the vehicle dock and from
the CLA power cable. The cables must not be bundled together as they exit the dock
(see Figure 18, on page 39).
As a guide, you can follow the diagram in Figure 18, adapting the example to suit your
own vehicle's configuration. For example, if you cigarette lighter socket is to the left of
the vehicle dock, route the two antenna cables towards the passenger side of the ve-
hicle. If your cigarette lighter socket is on the right-hand side of the vehicle dock, route
the two antenna cables towards the driver's door. The CLA cable and antenna cables
MUST be routed in opposite directions. Safely conceal all antenna cables within door,
carpet or cash panels to prevent snags and interference.
[ ]
38
Installation