Cable Separation And Routing - Sirius Satellite Radio Starmate 4 User Manual

Cable Separation and Routing

FCC Information
The satellite antenna cable, FM extender antenna (FEA) cable and cigarette lighter
adapter (CLA) power cable must be appropriately separated and routed for your radio
to be compliant with federal regulations.
LEFT RIGHT
Step 1
The connections on your vehicle dock
are clearly marked. Install your vehicle
dock and connect the antenna cable
into the connection labeled "ANT", the
CLA power cable into the power connec-
Power FEA Antenna
tion marked "PWR" and the FEA cable
into the connection marked "FM OUT".
(See Figure 17.)
PWR
AUDIO
Figure 17
Step 2
It is important that you keep the three cables as separate from each other as
possible and that you keep the two antenna cables away from the vehicle dock and from
the CLA power cable. The cables must not be bundled together as they exit the dock
(see Figure 18, on page 39).
As a guide, you can follow the diagram in Figure 19 (on page 39), adapting the example
to suit your own vehicle's configuration. For example, if you cigarette lighter socket is to
the left of the vehicle dock, route the two antenna cables towards the passenger side of
the vehicle. If your cigarette lighter socket is on the right-hand side of the vehicle dock,
route the two antenna cables towards the driver's door. The CLA cable and antenna
cables MUST be routed in opposite directions. Safely conceal all antenna cables within
door, carpet or cash panels to prevent snags and interference.
[ ]
38
Installation