SOYO SY-P4VDA User Manual page 35

Hardware Installation SY-P4VDA
to enter the Award BIOS Setup program. The CMOS SETUP
UTILITY will be shown on the screen. Then, follow these steps to
configure the CPU settings.
Step 1. Select [STANDARD CMOS FEATURE]
Set [Date/Time] and [Floppy drive type], then set [Hard Disk Type] to
"Auto".
Step 2. Select [LOAD OPTIMIZED DEFAULTS]
Select the "LOAD OPTIMIZED DEFAULTS" menu and type "Y" at the
prompt to load the BIOS optimal setup.
Step 3. Select [SOYO COMBO FEATURE]
Move the cursor to the [CPU Frequency Select], [CPU Ratio] field to set
CPU Clock/Ratio.
Note: Set the [CPU Frequency Select] field to "Manual", to be able to
change the CPU frequency 1 MHz stepping..
Step 4. Select [SAVE & EXIT SETUP]
Press <Enter> to save the new configuration to the CMOS memory, and
continue the boot sequence.
You are now ready to configure your system with the BIOS setup program.
Go to Chapter 3: BIOS SETUP
32